Team PT-6200, Manual Manual

Page: 5 / 12

26 27
3 Accessories
3.1 Installing/Removing the Battery Pack
To install the battery pack:
1) Match the 3 bulges of the battery pack with the
corresponding holes at the rear bottom of the
transceiver;
2) Then firmly press the battery pack downwards
to lock it in place until a click is heard.
To remove the battery pack:
1) Use your thumb to press the belt clip, and one side
of your index finger to press the release button;
2) And then pull the battery away from the transceiver.
Screw the antenna into the connector at the top of
the transceiver by holding the bottom of the antenna
and turn it clockwise until secure. Match the
grooves of the belt clip with those on the rear of the
battery. Then press the support belt clip downwards
to lock it in place.
3.2 Installing the Antenna
Screw the antenna into the connector at the top of the transceiv-
er by holding the bottom of the antenna and turn it clockwise
until secure. Match the grooves of the belt clip with those on the
rear of the battery. Then press the support belt clip downwards
to lock it in place.
3.3 Installing the Belt Clip
Match the grooves of the belt clip with those on the
rear of the battery. Then press the support belt clip
downwards to lock it in place.
3.4 Installing the Dust Cover over the Versatile Connector
When not using the optional Speaker/Microphone, install
the dust cover over the versatile connector with the sup-
plied screw.
3.5 Installing the Optional Speaker / Microphone
Insert the Speaker / Microphone plug into the jacks of the versatile
connector, and fix it with the supplied snail screw.
Notes:
Only use the original TEAM accessories for the PT-
6200.
Optional accessories, e.g. ear- / microphone, are not
included in the scope of delivery.
4 GETTING ACQUAINTED
4.1 Radio Overview
1 Antenna
2 LED Indicator
> Lights red while transmitting;
> Lights green while receiving a signal.
> Flashes orange while receiving DTMF, KDC1200 and 5 Tone
signaling identical with the local setting.
> Flashes red while in low battery power.
3 Channel Selector
Rotate to select channel 1-16.
4 Power/Volume Switch
Turn clockwise to switch on the radio. Turn counterclockwise till a
click is heard to switch off the radio. Rotate to adjust the volume
after turning on the radio.
5 Side Button 1
Programmable function button: Press it to activate the preset auxil-
iary function. Its default setting is scanning.
6 PTT (Push-to-talk)
To make a call, press and hold the PTT button, then speak into the
microphone with normal voice. Release the PTT button to receive.
7 Side Button 2
Programmable function button: Press it to activate the preset auxil-
iary function. Its default setting is canceling squelch.
8 Emergency Button
Press and hold it longer than the preset time to activate emergency
alert function.
9 Microphone/Speaker Jacks
For connecting external Microphone/Speaker.
GB
GB
pt-6200.qxp 03.05.2006 14:11 Seite 27