![background image](http://html1.mh-extra.com/html/team-play/fun-stop-photos-gen-ii/fun-stop-photos-gen-ii_installation-manual_3966766006.webp)
Page 6 of 10
© 2014 Team Play, Inc.
14. The cover of the shard tray should be removed.
The shards should fall out of the printer shard
tray to the floor of the printer compartment
inside of the photo booth.
Each time that you replace the paper roll, clean
up the shards from the floor of the printer
compartment.
Use of the shard tray would be likely to cause
the printer to jam and is not recommended.
15. The “READY” light will turn green on the printer
once the ink ribbon and paper have been
loaded properly.
16. Next, load the Ink Film and Ink Tray.