Photosimile 220
Operation Guide
© 2001 - 2016 Ortery Technologies, Inc. All rights reserved. Ortery is the registered trademark of Ortery Technologies, Inc.
a
b
Launch the Photosimile 220 control software.
Getting Started:
Taking Pictures:
1. Object Placement
Place the object in the center of the glass plate using the front or side
door.
a-b
2. Shooting Angle
Side shots
Side shots are taken from the front with / without the reflective door
cover unfurled.
a
b
a-b
Half Range
The Photosimile 220 features a side door for
conveniently placing objects inside the studio without having to move the camera / tripod. The
side door can be installed on the left or right side of the system and used in conjunction with the appropriate acrylic panel.
Full range
If you want to take photos for large object, remove the middle glass, install the two large acrylic panels,
then place the object in the center of the floor.
Note:
Follow the steps
c-f
in the Acrylic Panel Installation section of the Installation Guide to remove the
middle glass and install the two large acrylic panels.
c-e
f
c
d
e
f
Photosimile 220
