ROCK SOLID
PhotoBooth Kit for Stands and Tripods
If you have wheels on your stand, lock them
in place to prevent it from rolling. Adjust the
height of the stand to the desired position for
the monitor.
Place the Rock Solid Aero Elbow on the top
of the stand and articulate the elbow to 90˚.
Mount the Rock Solid VESA Local Monitor
Mount to the monitor.
Slide the Rock Solid VESA Local Monitor
Mount onto the Rock Solid Aero Elbow and
tighten the thumb screw on the Rock Solid
VESA Local Monitor Mount.
Position the monitor so the back leg is
perpendicular to the monitor by rotating the
Rock Solid Aero Elbow on the stand. When in
the desired position, tighten the thumb screw.
Attach the Rock Solid Master Clamp to the
upper section of the stand.
Attach the Rock Solid Master Articulating
Arm to the Rock Solid Master Clamp.
Attach the Camera Platform to the top of the
Rock Solid Master Articulating Arm.
Attach the camera to the Camera Platform.
While holding the camera, loosen the Rock
Solid Master Articulating Arm knob. The arm
and platform will become slack. Position the
camera over the monitor with one hand and
tighten the knob with the other.
SETUP INSTRUCTIONS FOR A STAND
It is highly recommended to place a
dual wing sand bag on the back stand
leg that is perpendicular to the monitor.
