57
LAMINATOR L201-S/D User Manual
Laminator Configure Tool
You can set the settings of laminator in the Laminating User Program.
Select the connection type, Serial or USB(HID).
If you select the Serial type, the baud rate value should
be 115200.
Item
Description
Port
Configuration
Get, Set
You can get/ set the value of Pass Mode, Temperature,
Start Position, Nuvia Connect, Power Saving from the
connected device.
Pass Mode
How to operate the laminator
Temperature
Set the laminating temperature
Start Position
Set the start position of laminating
Nuvia Connect
Set whether connect to a card printer or not
Power Saving
Set the duration of power saving mode
Information
Version
Show F/W version of the device
Device Serial
Show Serial Number of the device
Ribbon Count
Get the remaining count of the loaded film
Test
Test Start, Stop
Set how many cards will be laminated for the test.
F/W Download
Download the F/W to the connected device. Start/Stop
Test.
Film Type
Get the type of the loaded film
Summary of Contents for L201-S
Page 71: ......
