133
125
110
122
57
110
23
132
126
50
122
120
51
BAG E (Continued)
2 3
Figure 51
Figure 52
Figure 51
110
57
110
!
Step 23. Pick up your truck, making sure that the dogbones (59)
stay in the outdrives (77).
*NOTE: Final adjustment should be made once the car is fully
built and all radio gear and electrics are installed. Refer to the setup
sheet provided in the back of this manual for final ride height adjust-
ment.
!
Step 24. Attach the bottom of a rear shock (longer of the two
sizes of shocks) to the right rear suspension arm (50) by snapping the
shock bottom (120) onto the shock mount ball (122) that is attached
to the rear shock mount bracket (51) on the right rear arm(50).
!
Step 25. Slide a short shock mount bushing (132), large side first,
over the screw (23) on the right side of the rear shock tower (55).
!
Step 26. Place the top of the shock body (126) over the shock
mount bushing (132). Secure the shock to the tower (55) by threading
a 4-40 locknut (110) onto the shock mount screw (23).
*NOTE: Before attaching the top of the shock, make sure that
the dogbone is in place in the outdrive.
!
Step 27. Repeat Steps 24 through 26 for the left rear shock.
Figure 52
!
Step 28. Insert the shock end (120) of a front shock into the
shock mounting area of the right front suspension arm and line up the
hole in the shock mount ball (122) with the middle hole in the arm.
!
Step 29. Secure the shock to the front arm by threading a 4-40 x
1/2" cap-head screw (57) all the way into the arm from the rear.
!
Step 30. Slide a long shock mount bushing (133), large side first,
over the screw (23) on the right side of the front shock tower (24).
!
Step 31. Place the top of the shock body (125) over the shock
mount bushing (133) on the front shock tower (24). Secure the shock
to the tower (24) by threading a 4-40 locknut (110) onto the shock
mount screw (23).
!
Step 32. Repeat Steps 28-31 for the left front shock.
Summary of Contents for 2000
Page 2: ......
