Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
8
TKG RAC 1008 - 130904
Assembly page 8/48
Fax +32 2 359 95 50
Never move the appliance by pulling the cord. Make sure the cord
cannot get caught in any way. Do not wind the cord around the
appliance and do not bend it.
Stand the appliance on a table or flat surface.
Make sure the appliance has cooled down before cleaning and
storing it.
Make sure the cord never comes into contact with the hot parts of
the appliance.
The temperature of the accessible surfaces may be very high
when the appliance is in use. Do not touch these surfaces but use
the handles.
Make sure the appliance never comes into contact with
inflammable materials, such as curtains, cloth, etc. when it is in
use, as a fire might occur. It is advised to place a heat-resistant
coating between your table and the appliance (this way you don't
get burns on your table or table cloth).
Make sure not to scratch the special coating of the grill plate and
the pans as you might get pieces of this coating in the food. Use a
classical wooden spatula or a heat-resistant plastic one.
Unplug the appliance when not in use.
Only cook consumable food.
It is essential to keep the appliance clean as it comes into contact
with food.
Never place this appliance near to a wall. Always provide proper
ventilation all around the appliance when using it.
Your appliance must never be switched on through an external
timer or any kind of separate remote control system.
Please note: Should the symbol
be indicated on a certain
surface, you need to be careful when handling the product. This
symbol means: CAUTION, this surface may get very hot during
use.
The symbol
is always put on the surface with the highest
temperature, however the other metallic or non-metallic surfaces
can also become very hot during use and it is therefore advisable
to always handle them with care and if possible with the help of
isothermal gloves or other thermal protection. In case of doubt
concerning the temperature of a certain surface it is always
preferable to protect oneself.
