12
The docking tube can be fitted in various positions, the only rule being that the angled plate should sit on
top the rear tube or axle.
4.4 ADJUSTING INTO THE UP-RIGHT POSITION
At this point the handcycle will need to be adjusted so that it is in a perfect upright position and close
enough for you to achieve proper reach. This is achieved by first docking the handcycle to your
wheelchair. Tighten the two quick-release levers on either side of the frame to lock the clamps together.
Ensure that both levers close securely, without any play or looseness. If there is any play, tighten them.
With the two QR levers securely tightened loosen
the 8mmbolt on the male docking clamp, this will
allow the handcycle to be positioned perfectly
upright and/or towards or away from the
wheelchair. When you are satisfied that the
handcycle is positioned correctly tighten the 8mm
bolt and the two 3mm grub screws.
