28
29
MANUAL
Basic Functions
Antenna
Place the base of the antenna into the SMA socket and turn the antenna clockwise until it fits tight.
To remove the antenna turn the antenna counter-clockwise.
Battery Pack
To attach the battery pack to the radio, place the leading parts into the holes an the bottom of the radio.
Next, press the battery pack at the upper part (belt clip holder) against the radio until the battery pack
locks in.
To remove the battery pack from the radio, push down the clips on the left and right side of the battery
pack with your thumb and index finger until the battery pack is released.
Turn Power On / Off
To power on the radio, turn the On / Off switch clockwise beyond the barrier. A beep tone will be heard
followed by the words „
Power On
“ and the actual channel number if the functions beep tone and voice
annunciation have been activated. In the LC display all available function symbols can be seen for
approximatly 1 seconds.
To power off the radio, turn the On / Off switch counter-clockwise above the barrier.
Adjustment of Volume
To be able to set a comfortable volume level after turning the radio on, keep holding the monitor key
while adjusting volume to the desired level.
Transmit
To transmit, keep pressing the PTT key until you are finished with your message. For best sound
qualitiy, speak with a middle loud voice with a distance of approximately 4 inches to the microphone.
During transmission, the control LED lights up red.
After release of the PTT key, the radio return to reception mode.
Emergency Alarm
To send the emergency alarm, press the monitor key and the call key simultaneously. The alarm will
sound on the transmitting radio and on all receiving radios that are set to the same channel. To stop
the emergency alarm press the PTT key.
Calling Tone
To send a calling tone, hold the calling tone key for 2 seconds. Receiving radios set to same channel
and code will receive the calling tone.
Key Lock
To acitvate the key lock function, hold the the key lock key for 2 seconds. In the LC display a key
symbol will appear in the lower right corner. When the key lock function is activated, only the PTT-,
monitor- and calling keys are available. All remaining functions are disabled.
To deactivate the key lock function, please hold the key lock key [* LOCK] for approximately 2 seconds.
In the display, „UNLOCK“ will appear for a short while until the key symbol dissappears.
Key Pad:
13 Menu ( MENU )
14 Confirmation ( ENTER )
15 Multi Functional Key ( VFO / MR )
16 Scan ( 1 SCAN )
17 Priority Scan ( 2 PRI )
18 VOX ( 3 VOX )
19 TX Power ( 4 POWER )
20 Squelch ( 5 SQL )
21 Scrambler ( 6 SCR )
22 Background-Light On / Off / Auto ( 7 LED )
23 Background-Light Color ( 8 COLOR )
24 Multi-Tone ( 9 BEEP )
25 Keylock ( *LOCK )
26 ANI-Code ( 0 ANI )
27 Frequency Reverse
Summary of Contents for TeCom-PRO Freenet
Page 11: ......
