background image

 

 

 

 

With   the   UNIFY   EVO   line   we   have   launched   SmartAudio   V2.1.   Over   the   regular   SmartAudio,   it   changed   

control   for   PitMode   in   operation   to   a   switch(on   /   off)   rather   than   a   flag   that   is   refreshed   on   reboot.    

  

If   you   are   a   OSD   or   VTx   developer   interested   in   adding   support   for   SmartAudio,   please   check   our   

SmartAudio   specification 

.   SmartAudio   is   a   free-to-use   protocol.   If   you’d   like   to   use   “TBS   SmartAudio”   in   

your   marketing,   you   may   contact   us   for   licensing   options:    

  

http://team-blacksheep.freshdesk.com/ 

   

  

CRSF   

 

CRSR   is   a   protocol   designed   by   Team   BlackSheep   and   championed   through   the   TBS   Crossfire   remote   

control   system.   It   has   been   integrated   into   most   popular   remote   controls,   is   a   incredibly   high   bandwidth   

(low   latency)   full   duplex,   serial   data   transmission   protocol.   It   comes   with   native   functionality   such   as   OTA   

(over   the   air)   firmware   upgrades,   localized   configuration   menus   and   a   smart   routing   protocol.   

 

With   the   advent   of   the   TBS   UNIFY   EVO,   for   the   first   time   in   FPV   history   does   a   VTx   now   support   this   

functionality.   We   can   configure   channel,   output   power   and   pitmode   settings.   Additionally,   software   

updates   via   the   TBS   Crossfire   platform   are   now   possible.   

 

CleanSwitch   

 

A   new   feature   introduced   with   the   TBS   UNIFY   PRO   5G8   is   CleanSwitch.   When   video   transmitters   power   up   

or   change   frequency,   they   usually   send   a   burst   across   the   entire   band   which   disturbs   fellow   flying   pilots.   

All   UNIFY   EVO   5G8   video   transmitters   will   remain   in   their   lowest   power   output   (less   than   0.1mW)   while   

changing   channels   and   powering   up.   This   ensures   interruption-free   racing,   even   with   multiple   video   

transmitters   changing   channels,   or   powering   up.   Despite   all   this,   TBS   UNIFY   PRO   &   EVO   are   still   the   fastest   

video   transmitter   on   power   up   -   thus   ensuring   it   is   the   perfect   choice   for   any   application   where   quick   

channel   changes   are   a   necessity! 

 

 

   

 

 

 

 

 

 

 

 

17   

 

Summary of Contents for TBS UNIFY EVO 5G8



















Reviews: