15
Teac
hscape
Re
flect C
apture T
ool
User Manual
15
Check Your Calibration
Select
Save
to check that the image is correctly aligned in the panoramic view. Your goal is to have straight edges on the panoramic
image. Recalibrate by clicking on the
Calibrate
button once more and either realigning the white ring again or reading on to learn
how to adjust the circumference of the white ring.
Calibrate by Adjusting the Circumference
You may need to also adjust the circumference of the white ring to calibrate the camera (i.e., improve your panoramic image). Using
your mouse, click and drag just the thin white ring to adjust the circumference of the ring. Place the ring to a point just inside the
image perimeter.
Click on
Save
to recheck your calibration and recalibrate until you are satisfied with the image quality.
STEP 9
Adjust the Zoom for the Board Camera Image
The board camera should point directly at the board or other focal point (e.g., whiteboard, projector screen, chair, chart paper). If
needed, use the Zoom slide bar underneath the board camera preview image to manually adjust the range of view.
Panoramic Camera Preview
Board Camera Preview
