Teac SR-80iDAB, Owner'S Manual

Page: 26 / 40

26
Bitrate
The bitrate and sound mode of the broadcast currently
being received is displayed.
Signal error rate
This displays the digital bit error rate (0-100) of the
currently tuned channel. The lower the figure the better
the quality of the received broadcast.
DAB CT (Clock Time) mode
The CT data is supplied by the DAB station and should
always be accurate. When you set the DAB CT mode to
on, the clock setting of the SR-80iDAB will be adjusted
automatically according to this data. Therefore, if you
tune in a DAB station that is broadcasting incorrect CT
data, the clock might be innacurately adjusted, and that
could eventually affect timer operation.
<
The DAB CT mode is set to on in the factory default
setting. When DAB CT is set to on, RDS CT is off.
Turning the DAB CT mode on or off
1. In DAB mode, press and hold the INFO button for
more than 2 seconds.
The DAB CT menu appears.
2. Press the TUNING (
.
or
/
) button to select
on or off.
In DAB mode, use the DAB menu to access various
functions.
1
In DAB mode, press the DISPLAY button.
2
Select the desired menu on the second line of
t h e d i s p l ay u s i n g t h e T U N I N G b u t to n s
(
.
/
/
).
The options change as follows.
1 Manual tune
2 Full scan(Auto scan)
3 DRC(Dynamic Range Control)
4 SW version
Manual tune
This option allows you to manually tune in a channel and
view a continuously updated indication of the strength
of the signal. This could be useful when adjusting or
positioning an antenna for better reception.
1
In DAB menu mode, select “Manual tune”
(page 27).
Setting the DAB Display (2) Using the DAB Menu (1)