Teac R-4iNT Instruction Manual Download Page 48

Page: 48 / 49

Troubleshooting

If you experience any trouble with your wireless Internet Radio, then you may find it useful to visit the help

section on our webpage:

http://www.wifiRadio-frontier.com

If you have trouble connecting the Radio to your wireless network, these steps may help to resolve the

problem:

1. Confirm that a Wi-Fi connected PC can access the Internet (i.e. can browse the web) using the same

network.

2. Check that a DHCP server is available, or that you have configured a static IP address on the Radio.

You can configure a static IP address on the Radio using the menu item ‘System setting -> Network ->

Manual setting-> Wireless’, and then select ‘DHCP disable’.

3. Check your access point does not restrict connections to particular MAC addresses. You can view the

Radio’s MAC address using the menu item ‘System setting -> Network -> View setting-> MAC address’.

4. If you have an encrypted network, check that you have entered the correct key or password into the

Radio. Remember that text-format keys are case sensitive. If, when attempting to connect to an

encrypted network, your Radio displays: ‘Wireless error’ followed by a 5-digit number, then please ensure

that you enter the correct passphrase for the network. If the problem persists, then you may need to

consult your network configuration.

5. If your Radio can connect to the network successfully, but is unable to play particular stations, it may be

due to one of the following causes:

a. The station is not broadcasting at this time of the day (remember it may be located in a different time

zone).

b. The station has reached the maximum allowed number of simultaneous listeners.

c. The station is not broadcasting anymore.

d. The link on the Radio is out of date.

e. The Internet connection between the server (often located in a different country) and you is slow.

Try using a PC to play back the stream via the broadcaster’s web site.

6. If you can play back the station with a PC, use the form at

http://www.wifiRadio-frontier.com

to notify us

so that we can change the station data that is used by the Radio.

Summary of Contents for R-4iNT


















































Search results

Summary of Contents for R-4iNT

Reviews:

Related manuals for R-4iNT

Brands by name

Popular brands

Teac R-4iNT, Instruction Manual

Search results

Summary of Contents for R-4iNT

Reviews:

Related manuals for R-4iNT

Brands by name

Popular brands