6
V
Placement precautions
o
Do not place anything on top of the unit .
o
Do not install this unit in a location that could become hot . This
includes places that are exposed to direct sunlight or near a
radiator, heater, stove or other heating equipment . Do not place
the unit on top of an amplifier or other equipment that might
generate heat that exceeds the operating temperature range
of this unit . Doing so could cause discoloration, deformation or
malfunction .
o
Place the unit in a stable location .
o
When installing this unit, leave a little space (at least 3 cm or 1
"
)
between it and walls and other devices in order to allow good
heat dissipation .
If you put it in a rack, for example, leave at least 5 cm (2
"
) open
above it and at least 10 cm (4
"
) open behind it .
Failure to provide these gaps could cause heat to build up inside
and result in fire .
o
Do not move the unit during use .
o
Be careful to avoid injury when moving the unit due to its
weight . Have someone help you move it if necessary .
o
The voltage supplied to the unit should match the voltage
printed on the bottom of the unit . If you are in any doubt regard-
ing this matter, consult an electrician .
o
Do not open the body of the unit as this might result in damage
to the circuitry or cause electric shock . If a foreign object should
get into the unit, contact your dealer .
o
When removing the power plug from the wall outlet, always pull
directly on the plug; never yank on the cord .
Before use
Check to be sure the box contains all the included items shown
below .
Please contact the store where you purchased this unit if any
of these items are missing or have been damaged during
transportation .
Power cord × 1
Rubber pads × 3
Owner’s manual (this document, including warranty) × 1
o
For information about the warranty, users living in the USA and
Canada should see pages 44–45 and the back cover (war-
ranty document) . Users living in Europe and other regions should
see page 45 .
Included accessories
