CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
PRODUTO LASER CLASSE 1
CAUTION:
To reduce the risk of electric shock, do not remove the cover
(or back). There are no user serviceable parts inside the unit. Refer all
servicing to qualify personnel.
The lightening flash with arrowhead symbol within the triangle is a warning sign
alerting the user of “dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to
beam. Class 1 laser product.
If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.
IMPORTANT!
- Batteries should not be exposed to excessive heat such as sunshine, fire or the like.
- Please consider the environment when disposing of batteries.
- Do not cover the ventilation openings with items such as newspapers, table-cloths, curtains,
etc.
- No naked flame sources, such as lighted candles, should be placed on the device.
- Only use the device in moderate climates.
- The apparatus should not be exposed to dripping or splashing.
- Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation.
- Do not place objects filled with liquids, such as vases, on the device.
- The marking plate is located on the back of unit.
- Mains plug is used as the disconnect device and it should remain readily operable. To
completely disconnect the power input, the mains plug of the device should be disconnected
from the mains completely. The mains plug should not be obstructed and should be easily
accessed during intended use.
- Due to electrical fast transient or/and electrostatic phenomenon, the product may malfunction
and require a power reset.
- Excessive sound pressure from earphones and headphones can cause hearing loss.
1. HANDLE
2. FM TELESCOPIC ANTENNA
3. CD COMPARTMENT
4. AUX.IN: AUXILIARY INPUT
5.
POWER ON-OFF/SOURCE: FM,
AM, CD, AUX IN
6.
PROGRAM / RADIO PRESET
STATIONS
/ REPEAT
7. PLAY / PAUSE
8.
MEMORY
/ STOP
9. SKIP-/TUNE- BUTTON
10. SKIP+/TUNE+ BUTTON
11.
VOLUME- DOWN
12.
UP
13. SPEAKER
14. LCD DISPLAY
15. AC INPUT SOCKET (
AC IN
)
16. BATTERY & AC CORD COMPARTMENT
This unit operates on AC (240V 50Hz) or DC (9V
) 6 x 1.5V Type UM-2 /R 14 / ’’C’’
(Batteries not included)
AC OPERATION:
• Connect the AC Power Cord to your AC household mains outlet and switch on the mains
supply. Make sure the voltage is compatible.
• Disconnect the power cord form the mains when not in use.
NOTE: In a concern of saving energy, when playback has reached to the end or listening
volume is set at a very low level and no control is operated on the device for a period of 10
minutes, the unit will automatically switch to Standby mode.
GENERAL CONTROLS
POWER SUPPLY
- 3 -
- 4 -
RD-3353NA IB TEAC 001 REV0.indd 3
2017/10/27 16:29:01