- 16 -
System Connections (Continued)
Connecting TV Antenna
Connect TV signal source to the TV jack on the jack panel of the unit.
After connection, turn on the unit and press the SOURCE button to shift to TV mode. If you have
been scanned TV programs, take the following steps to select a channel.
1.
Channel Numbers
0-9
Press the number button to select the channel, after a few seconds the selected channel will
display-
or
Press the number button to select the channel and then press the
/+10 button to go to the
selected channel immediately-
or
Press 0 followed by the channel number to go to the selected channel immediately.
2.
Channel Numbers 10-99
Press the number button to select channel XX, after a few seconds the selected channel will
display-
or
Press the number button to select channel XX, and then press the
/+10 button go to the
selected channel immediately.
* X denotes the channel number.
