7
Connections
A
B
C
FM antenna
While in FM mode, tune in an FM station and extend the lead to find the best position for
the reception. This antenna may need to be repositioned if you move your unit to a new
location.
Speakers
Connect the left speaker’s cable to “L”, and the right speaker’s cable to “R”.
Be sure to connect the black side of the cable to the
_
(negative) terminal and the gray
broken-line-printed side to the
+
(positive) terminal.
How to connect
Push the tab, insert the end of the cable, then pull the tab back. Make sure
it is fastened securely by pulling the cable lightly. Make sure only the bare,
stripped wire is inserted in the jack and that no plastic insulation is
preventing contact between the speaker wire and terminal.
<
To avoid damaging the speakers with a sudden high-level signal, be sure to switch the
power off before connecting the speakers.
<
If not using the included speakers, make sure the speakers you use are at least 4
Ω
impedance.
AC Power Cord
Plug this AC power cord into an AC wall socket.
C
B
A
CAUTION:
<
Switch off the power to all equipment before making connections.
<
Read the instructions of each component you intend to use with this unit.
<
Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal
interconnection cables together with the AC power cord.
