28
Adding ID filters.
1
Press the Add (F1) button.
This opens a character input screen.
2
To use an extended ID, press the Std./Ext. (F3)
button.
3
Use hexadecimal to input the ID.
4
Press the OK (F1) button.
NOTE
To change an ID filter that has already been added,
select it and press the ENTER button.
SAMPLING POINT
Set the sampling timing.
SJW
Set the resynchronization jump width.
CAN FD
ON: Record CAN and CAN FD.
OFF: Record CAN only. Do not record CAN FD.
LISTEN ONLY
OFF: Return ACK when data frame received.
ON: Do not return ACK when data frame received.
TERMINATOR
Set the terminator to ON/OFF for the CAN bus built
into the CAN module.
THINNING OUT
Limit to 1 received data frame during the set time
window for each ID.
MAX REC. RATE
Set the maximum recording rate for each CAN port
separately.
Data that exceeds the set rate will be discarded.
Set to 100% for no maximum limit.
o
The analog recording rate is determined by the
sampling frequency, channel count and AD bits.
The CAN recording rate is determined by the baud
rate and the maximum recording rate.
o
Automatic setting is a function that deducts the
analog recording rate from the settable recording
rate and divides the remainder evenly among all
ports.
ID FILTER
Receive only specified ID data frames.
Up to 32 IDs can be added for each port.
8. Settings
Summary of Contents for ER-LXRC1000
Page 1: ...Remote Control Unit Instructions for Use Z ER LXRC1000 D01349910F...
Page 37: ...37...
Page 38: ...38...
Page 39: ...39...