33
ENGLISH
in poor recording. The following problems also can result occa-
sionally:
– The disk (CD-R, CD-RW) becomes defective because of faulty
recording, and cannot be read.
– Additional recording cannot be made because of faulty previ-
ous recording.
(b) Data protection
Recording may not be completed normally in some cases due to a
malfunction of the drive, a defective medium, etc. Therefore, use
the following precautions.
– Be sure to confirm the recording status by playing back the
newly recorded data after completing the recording operation.
– Be sure to store the source file from which the data is recorded
until the recording is confirmed.
– Do not repair the drive or replace a part of the drive under cir-
cumstances other than designated assurance conditions.
Cleaning and maintenance of your TEAC drive
TEAC drive will not need maintenance if used as specified in this manual.
Usually there are only problems with dirty or defective DVDs/CDs.
Important:
Do not use cleaning CDs which will remove dirt of the
lense of the laser aided by a little brush. Do not clean
the inner parts of your TEAC drive with compressed air.
Any of these methods may cause damage to your TEAC
drive.
3. Precautions for Installation and Operation
