manualshive.com logo in svg

Teac DVW-D11, User Manual

Share
Download
Teac DVW-D11 User Manual Download Page 28

12.1 UnderRun Protect

20

TEAC DVD Duplicator User’s Manual

12.1 UnderRun Protect

The 

UnderRun Protect

 setting turns Buffer UnderRun Protection on or off. The 

default setting is 

ON

.

12.2 Overburn

The 

Overburn

 setting turns the Overburn function in the target drive on or off. The 

default setting is 

OFF

.

12.3 Read Error Skip

The 

Read Error Skip

 setting controls error skipping during reading of the source 

disc.

If the setting is 

OFF 

and an error is detected, the target drive stops and displays 

the read error message.

If the setting is 

ON

, no messages will be displayed if an error occurs. The copy 

operation will be completed and the copy will include all errors detected during 
the process.

The default setting is 

OFF

.

12.4 Format HDD

(For factory use only; please do NOT use this function.)

The 

Format HDD

 option is valid only on DVD Duplicators that feature a factory-

installed hard disk drive. The factory-installed hard disk drive has already been 
partitioned and formatted and is ready for use.

12.5 Verify HDD

(For factory use only; please do NOT use this function.)

The 

Verify HDD

 option is valid only on DVD Duplicators that feature a factory-

installed hard disk drive. The factory-installed hard disk drive has already been 
partitioned and formatted and is ready for use.

Warning!

 Do not run this function. It will erase all data already loaded into disk 

partitions. This function is reserved for factory use only.

Warning!

 Do not run this function. It will erase all data already loaded into disk 

partitions. This function is reserved for factory use only.

TEACdvwd11.book  Page 20  Sunday, May 1, 2005  6:04 PM

Summary of Contents for DVW-D11







































Reviews:

No comments

Brands by name

Popular brands

Load more brands