Installing the DVD-ROM Drive
TEAC DVD-ROM Installation Guide
—
6—
7.
Connect the power cable to the power connector on the rear panel of the
DVD-ROM drive.
Insert the power cable plug in the correct orientation into the power connector.
The plug is shaped so that it can be easily inserted in only one orientation; do
not force the plug into the connector. The +5v terminal is on the left as you face
the rear panel; the +12v terminal is on the right. The two center terminals are
ground terminals.
8.
Re-install your computer’s cover, faceplate, or bay cover.
9.
Start your system.
Notes:
❑
The TEAC DVD-ROM drive is a true Plug-N-Play device; therefore, it will be
detected automatically by Windows 98SE/Me/2000/XP and assigned a logical
drive letter. There is no need to install any drivers.
❑
Windows NT 4.0 Users:
Windows NT 4.0 does not support the Plug-N-Play
feature. Therefore, confirm that the IDE CD-ROM DRIVE ATAPI version 1.2
driver is installed. If not, open the Control Panel, double click “SCSI Adapt-
ers,” click the “Drivers” tab, then click the “Add” button. At the “Select a SCSI
Adapter Option” window, select “IDE CD-ROM DRIVE (ATAPI Ver 1.2).”
Click “Install” and follow the instructions on screen. The drive will then be rec-
ognized by the operating system.
DVD 16X_short.fm Page 6 Wednesday, November 27, 2002 11:44 AM
