42
Listening to the DAB Radio
MEMORY
TUNING
SCAN
SELECT
Auto Scan (Local Scan)
1
Select “DAB Radio” using the SOURCE button.
<
You can also select “DAB Radio” by pressing the TUNER button
on the remote control unit once or twice.
2
Press the SCAN button.
The unit will start scanning and listing the stations that you can
listen to. (Local Scan: 10A to 13F)
Auto Tuning
You can select the stations that are listed after scanning by pressing
the TUNING button (
.
or
/
).
Manual Tuning
1
While listening to DAB radio, press the SELECT button.
The signal strength is displayed.
Check the antenna adjustment or positioning for the best
reception.
2
Press the SELECT button again to display the band name
and frequency.
When the unit receives ensemble broadcast at selected
frequency, the ensemble name will be displayed in the second
line in a few seconds.
3
Press the TUNING button (
.
or
/
) to select the
frequency of DAB-ensemble that contains the service
(station) you want to listen to.
4
Wait a few seconds until the ensemble name appears on
the display.
5
Press the SELECT button.
5
Press the TUNING button (
.
or
/
) to select the
service you want to listen to.
