22
Basic operations
Pausing playback
During playback, press the Play/Pause button (
G
/
J
). Playback
stops at the current position.
<
To resume playback, press the Play/Pause button (
G
/
J
) again.
Skipping playback
During playback, press the Skip buttons (
.
/
/
) repeatedly
until the desired song is found.
<
When the Skip button (
.
) is pressed during playback, the
current song will be played from the beginning. If you want to play
the previous songs, press the Skip button (
.
) twice or more.
Searching for a part of a song
Hold down
During playback, hold down the Search button (
m
or
,
) and
release it when the part you want to listen to is found.
1
Press the SOURCE button to select “iPod”.
<
You can also select iPod by pressing the iPod/USB button on the
remote control unit once or twice.
2
Insert the iPod into the dock.
The iPod automatically turns on and starts playback from the
iPod’s music list.
<
When the iPod is inserted while a source other than iPod is
selected, the iPod will turn on and enter the pause mode.
<
Make sure to use an appropriate dock adapter (page 18).
<
The iPod is recharged when it is plugged into the dock and
the DR-H358i is on. While the unit is on standby, the iPod is not
recharged because the unit’s power consumption is minimized
to meet the regulation of IEA.
<
When headphones are plugged into the iPod, sound comes
from both the speakers and the headphones.
<
The video signal from a connected iPod is output only from the
video output terminals of DR-H358i.
Listening to an iPod
