-Chrominance input signal (p-p) Cin=1.0V(max)
16.10.
TCD1102:
16.10.1.
Description
The TCET110./ TCET2100/ TCET4100 consists of a phototransistor optically coupled to a gallium
arsenide infrared emitting diode in a 4-lead plastic dual inline package. The elements are mounted on
one leadframe using a
coplanar technique
, providing a fixed distances between input and output for highest safety
requirements.
16.10.2.
Applications
Circuits for safe protective separation against electrical shock according to safety class II (reinforced
isolation):
For appl. class I – IV at mains voltage ? 300 V
For appl. class I – III at mains voltage ? 600 V
according to VDE 0884, table 2, suitable for:
Switch-mode power supplies, line receiver, computer
peripheral interface, microprocessor system interfaces.
VDE 0884 related features:
Rated impulse voltage (transient overvoltage) V
IOTM
= 8 kV peak
Isolation test voltage (partial discharge test voltage) V
pd
= 1.6 kV
Rated isolation voltage (RMS includes DC) V
IOWM
= 600 V
RMS
(848 V peak)
Rated recurring peak voltage (repetitive) V
IORM
= 600 V
RMS
16.10.3.
General features:
CTR offered in 9 groups
Isolation materials according to UL94-VO
Pollution degree 2 (DIN/VDE 0110 / resp. IEC 664)
Climatic classification 55/100/21 (IEC 68 part 1)
Special construction: Therefore, extra low coupling capacity of typical 0.2 pF, high
C
ommon
M
ode
R
ejection
Low temperature coefficient of CTR
G = Leadform 10.16 mm; provides creepage distance > 8 mm, for TCET2100/ TCET4100 optional;
suffix letter ‘G’ is not marked on the optocoupler
Coupling System U
16.11.
ST24C08:
16.11.1.
General description:
The ST24C08 is an 8Kbit electrically erasable programmable memory (EEPROM), organised as 4 blocks of 256 *
8 bits.
The memory operates with a power supply value as low as 2.5V. Both Plastics Dual-in-Line and Plastic Small
Outline packages
are available.
16.11.2.
Features:
•
Minimum 1 million ERASE/WRITE cycles with over 10 years data retention
•
Single supply voltage:4.5 to 5.5V
•
Two wire serial interface, fully I2C-bus compatible
•
Byte and Multibyte write (up to 8 bytes)
