3. Control Input
Min: 7.5V Max.: 18V
4. Ground
Iout 2A
p-p
during scan 1.2A
p-p
during flyback
5. Driver
Output resistor 8.5 Ohm sink 15 Ohm source typ.
6. Supply voltage
Max:16V (Operating range 6.6V-13V)
7. No connection
8. Line Voltage
Min:50V Max:500V
16.8.
SDA5555:
16.8.1.
General description:
• Feature selection via special function register
• Simultaneous reception of TTX, VPS, PDC, and WSS (line 23)
• Supply Voltage 2.5 and 3.3 V
PINNING
1
Comb Filter Standard Selection 1
Low Level : 0V
High Level : 3.3 V
2
Key 2
Low Level : 0V
High Level : 3.3 V
3
Key 1
Low Level : 0V
High Level : 3.3 V
4
Loc.key.switch input
Low Level : 0V
High Level : 3.3 V
5
Loc.key.switch input
Low Level : 0V
High Level : 3.3 V
6
Loc.key.switch input
Low Level : 0V
High Level : 3.3 V
7
Loc.key.switch input
Low Level : 0V
High Level : 3.3 V
8
Mute output
Low Level : 0V
High Level : 3.3 V
9
Digital supply voltage
2.5 V
10 Ground
11 Digital supply voltage
3.3 V
12 CVBS input
1 Vpp
13 Analogue supply voltage
2.5 V
14 Analogue ground
15 Wake Interrupt
Low Level : 0V
High Level : 3.3 V
16 AV-1 status input
Low Level : 0V
High Level : 3.3 V
17 AV-2 status input
Low Level : 0V
High Level : 3.3 V
18 Shortcut protection
Low Level : 0V
High Level : 3.3 V
19 SAND input
Low Level : 0V
High Level : 3.3 V
20 ODD/EVEN output
Low Level : 0V
High Level : 3.3 V
21 DVD 12 V Sense
Low Level : 0V
High Level : 3.3 V
22 Not used
23 Idle Off
Low Level : 0V
High Level : 3.3 V
24 IR-input
Low Level : 0V
High Level : 3.3 V
25 Data output
Low Level : 0V
High Level : 3.3 V
26 Clock signal output
Low Level : 0V
High Level : 3.3 V
27 Stand-By Mode selection
Low Level : 0V
High Level : 3.3 V
28 Not used
29 Ground
30 Digital supply voltage
3.3 V
31
Write Protect output
Low Level : 0V
High Level : 3.3 V
32 Service output
Low Level : 0V
High Level : 3.3 V
33 Reset output
Low Level : 0V
High Level : 3.3 V
34 6 MHz cristal connection 2
Low Level : 0V
High Level : 3.3 V
35 6 MHz cristal connection 1
Low Level : 0V
High Level : 3.3 V
36 Analogue ground
37 Analogue supply voltage
2.5 V
38 OSD-Red output
0.7 Vpp to 1.2 Vpp
