background image

 

 

                                                                                                 

TASCAM MD-CD1 RS-232C Protocol Specification 

                                                                                                                                                                                               
 37 

TEAC 

Corporation

 

Data 5 

Tens digit of the 
minutes 

Data 6 

Ones digit of the 
minutes 

Data 7 

Hundreds digit of 
the minutes 

Data 8 

Thousands digit of 
the minutes 

 

Data 9 

Tens digit of the 
seconds 

Data 10 

Ones digit of the 
seconds 

 

Data 11 

0 is returned. 

Data 12 

0 is returned. 

Request/Preset  PGM TOTAL TRACK No./TOTAL TIME SENSE [5E] 

 
KEYBOARD TYPE RETURN 

This is the return command for the command "KEYBOARD TYPE SENSE[5F]." 
It returns the type of PS/2 keyboard. 
Command DF 
Machine ID 

Data 2 

bytes 

Data 1 

Data 2 

Description 

Remarks 

Japanese Keyboard 

The setting when a Japanese keyboard is connected 

US Keyboard 

The setting with an English keyboard is connected 

Request/Preset  KEYBOARD TYPE SENSE [5F] 

 
ERROR SENSE REQUEST 

This is transmitted when the controlled device is in an error condition. 
If this command is transmitted from the controlled device, the external controller device should 
transmit the command "ERROR SENSE [78]" to determine the content of the error. 
Command F0 
Machine ID 

Data none 
Request/Preset none 

 
CAUTION SENSE REQUEST 

This is transmitted when the controlled device is in a caution condition. 
If this command is transmitted from the controlled device, the external controller device should 
transmit the command "CAUTION SENSE [79]" to determine the content of the warning. 
Command F1 
Machine ID 

Data none 
Request/Preset none 

 
ILLEGAL STATUS 

This command is returned when an invalid command or data has been sent to the controlled device. 
If this command is transmitted from the controlled device, the external controller device should 
re-transmit the correct command or data in compliance with the specifications. 
Command F2 
Machine ID 

Data none 
Request/Preset none 

 

Summary of Contents for CD-RW901SL









































Reviews: