Teac CD-C68E, User Manual

Page: 8 / 24

3. Interface connector
Connect to the interface or IDE interface card using the 40-pin flat cable.
Cable-side mating connectors : 5320-40AGS1 Molex, or equivalent.
4. Power connector
Connect to the +5 V and +12 VDC power source.
Cable-side mating housing : 8981-4P Molex
Cable-side mating terminal : 8980-3L Molex
5. Eject prevention strap
S0 : Determines whether eject is allowed or prevented, as follows:
ON: Allowed
OFF: Prevented
PREVENT/ALLOW MEDIA REMOVAL command makes the tray possible to be released from the
“prevented” status.
6. DMA ON/OFF Strap
S1: Determines whether DMA is on or off, as follows:
ON : DMA on
OFF : DMA off