Preset Tuning
Manual Memory Presetting
Automatic Memory Presetting
– 14 –
This facility is used to store FM, AM broadcasting from
Channel 1 to 30 respectively.
POWER ON
1
4
3
2
1. Press the TUNER button.
2. Select the AM or FM by pressing the BAND selector
button.
3. Press the MEMORY button for a while (for more than
1.5 seconds).
1
The start frequency will show in the display.
●
87.5 MHz in FM, 530 kHz in AM.
2
The frequency and display will automatically scan.
●
100 kHz steps for FM, 10 kHz steps for AM.
3
The frequency shown in the display will rapidly
change. As each station is located a preset
number will appear in the display indicating which
preset MEMORY button has been assigned to the
station located. The scanning process will continue
to operate in this fashion until 30 stations have
been found and entered into the preset memory
or when there are no more stations to be found
on the waveband chosen. The memory indicator
will extinguish and let you hear the last station to
be memorized.
●
To listen to the memorized station select the band
required and press the numeric keys button 1, 2, 3
etc.
4. The last memorized channel of each band will be
displayed when Auto Memory is completed. Check
the programmed frequencies with PRESET UP,
DOWN button.
POWER ON
1
4,6
5
6
2
3
1. Press the TUNER button.
2. Select the AM or FM by pressing the BAND selector
button.
3. Press the MODE button to change to TUNING mode.
(The PRESET CH. indicator disappears from the
display).
4. Select the frequency you want to preset by pressing
UP or DOWN tuning button.
5. Press the MEMORY button briefly, MEMORY display
will blink at an interval of 1 second.
6. While the MEMORY indicator is lit, press the numeric
key(s) to input the channel number in which the data
(AM or FM band and frequency) for the broadcast is
to be stored (or press the PRESET button then press
the MEMORY button again).
Recalling Frequencies
Press the numeric key(s) corresponding to the channel
number to tune directly to a broadcast.
Using the Memory Scan function
When the MEMORY SCAN button is pressed, the preset
channels in which frequencies in the band (AM or FM)
selected have been stored are scanned at 5-second
intervals. When you hear a broadcast you want to listen
to, release the Memory Scan function by pressing the
MEMORY SCAN button again.
"Back-up" memory function
This function conserves the already preset station mem-
ories, and "Most-recent" memory function, even in the
event of a cut-off of power supply, as when the plug is
pulled out of the wall outlet, for 3 days.
