background image

7

Discs that can be played by this unit

This unit can play these types of discs without an adapter. It cannot 
play any other type of disc.

 Playback of any other type of disc could cause loud noise 

and damage to speakers as well as harm hearing. Never try 
to play any other type of disc.

<

  Depending on the quality of the disc and/or the condition of the 

recording, some discs might not be playable.

<

  This  unit  cannot  read  or  playback  the  following  types  of  discs: 

video CDs, CD-ROMs, Super Audio CDs, video DVDs, audio DVDs, 
and DVD-ROMs.

 

CAUTION

If you put a video or audio DVD, DVD-ROM or other types 
of DVD into the disc tray, the unit will attempt to read the 
disc and rotate at high speed. If you accidentally insert such 
a disc, wait until the unit stops spinning before ejecting 
it  in  order  to  avoid  possibly  damaging  the  disc.  Do  not 
attempt to remove the disc when “READING” appears on 

the display.

<

  Copy-protected discs and other discs that do not conform to the 

CD standard might not play correctly with this player. If you use 
such discs with this unit, TEAC Corporation and its subsidiaries will 
not be responsible for any consequences or guarantee the quality 
of  reproduction.  If  you  experience  problems  with  such  non-
standard discs, you should contact their issuers.

CDs (12-cm and 8-cm) that bear the “COMPACT disc DIGITAL 
AUDIO” logo can be played by this unit.

<

 The logo should be on the disc label or the CD jacket.

CD-R and CD-RW discs that have been correctly recorded in 
the audio CD format and finalized, as well as finalized CD-R and 
CD-RW discs that contain MP3 or WMA files, can be played by 
this unit.

Discs (1)

Please use CD, CD-R and CD-RW discs bearing the 

“DIGITAL AUDIO” mark.

CD

CD-R

CD-RW

<

  Depending on the quality of the disc and/or the condition of the 

recording, some CD-R or CD-RW discs may not be playable.

About CD-R/CD-RW discs

This  unit  can  play  back  CD-R  and  CD-RW  discs  that  have  been 
recorded  in  the  audio  CD  format  (CD-DA)  and  the  MP3  or  WMA 
format.

<

  Discs created by a CD recorder must be finalized before use with 

this unit.

<

  Depending on disc quality and recording conditions, playback of 

some discs might not be possible. Please see the manual for the 
device that you used to create the disc.

<

  If you are uncertain about the handling of a CD-R or CD-RW disc, 

please contact the seller of the disc directly.

CAUTION

<

  Do  not  play  any  disc  that  is  warped,  deformed  or  damaged. 

Playing  such  discs  could  cause  irreparable  harm  to  the  playing 
mechanisms.

<

  While printable CD-R and CD-RW discs utilizing modern printing 

technologies  are  generally  acceptable,  older  systems  that  use 
adhesives to attach paper type labels to the disc surface are not 
recommended. 

<

  Do not stick paper or protective sheets on discs and do not use 

any protective coating sprays.

<

  Never use a stabilizer. Using commercially available CD stabilizers 

with  this  unit  will  damage  the  mechanisms  and  cause  them  to 
malfunction.

<

  Do  not  use  irregularly-shaped  discs  (octagonal,  heart-shaped, 

business card size, etc.). Such CDs could damage the unit.

Continued on the next page

 

Summary of Contents for AD-RW900





















































Reviews: