manualshive.com logo in svg

Teac 17MB10, Service Manual

Share
Download
Teac 17MB10 Service Manual Download Page 29

25 

22” TFT TV Service Manual 

 

13/10/2004

 

11.20. MSP34X0G 

MSP3400G 

Multistandard Sound Processor Family 

11.20.1. Introduction 

The MSP 34x0G family of single-chip Multistandard Sound Processors covers the sound processing of all 
analog TV-Standards worldwide, as well as the NICAM digital sound standards. The full TV sound 
processing, starting with analog sound IF signal-in, down to processed analog AF-out, is performed on a 
single chip. Figure shows a simplified functional block diagram of the MSP 34x0G.  
This new generation of TV sound processing ICs now includes versions for processing the multichannel 
television sound (MTS) signal conforming to the standard recommended by the Broadcast Television 
Systems Committee (BTSC). The DBX noise reduction, or alternatively, MICRONAS Noise Reduction 
(MNR) is performed alignment free. Other processed standards are the Japanese FM-FM multiplex 
standard (EIA-J) and the FM Stereo Radio standard. Current ICs have to perform adjustment procedures 
in order to achieve good stereo separation for BTSC and EIA-J. The MSP 34x0G has optimum stereo 
performance without any adjustments. 
All MSP 34x0G versions are pin and software downward compatible to the MSP 34x0D. The MSP 34x0G 
further simplifies controlling software. Standard selection requires a single I²C transmission only. 
The MSP 34x0G has built-in automatic functions: The IC is able to detect the actual sound standard 
automatically (Automatic Standard Detection). Furthermore, pilot levels and identification signals can be 
evaluated internally with subsequent switching between mono/stereo/bilingual; no I²C interaction is 
necessary (Automatic Sound Selection). 
 

 

Source Select

 

I

2

S bus interface consists of five pins:  

1. I2S_DA_IN1, I2S_DA_IN2: For input, four channels (two channels per line, 2*16 bits) per sampling cycle 
(32 kHz) are transmitted. 
2. I2S_DA_OUT: For output, two channels (2*16 bits) per sampling cycle (32 kHz) are transmitted. 
3. I2S_CL: Gives the timing for the transmission of I

2

S serial data (1.024 MHz). 

4. I2S_WS: The I2S_WS word strobe line defines the left and right sample. 

11.20.2. Features 

• Standard Selection with single I

2

C transmission  

• Automatic Standard Detection of terrestrial TV standards  
• Automatic Sound Selection (mono/stereo/bilingual), new registers MODUS, STATUS  
• Two selectable sound IF (SIF) inputs  
• Automatic Carrier Mute function  
• Interrupt output programmable (indicating status change)  
• Loudspeaker / Headphone channel with volume, balance, bass, treble, loudness  
• AVC: Automatic Volume Correction  
• Subwoofer output with programmable low-pass and complementary high-pass filter  

Summary of Contents for 17MB10















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands