www.tepari.com Freephone 0800 837 274
20
Te Pari Racewell DR3 Auto Drafter Manual
1115-1
Racewell DR3
AUTO DRAFTER
Arrow to the
SCP Command
entry in the list
Press the
ENTER
key to select it
If you wish to use your indicator in
another situation without the Racewell,
you need to set this back to
Automatic
.
Check and set the following options:
MIN WEIGH TIME:
is set to
1.5 s
. And the
DELAY:
is set to
0.0 s
.
The other entries should already contain the correct values .
When the entries are set, press the escape key to return to the main screen .
Press the blue soft key below
CELL
on the screen to enter
the
Load Cell Setup
screen
Ensure the
CAPACITY:
and
SENSITIVITY:
entries have the
correct values as shown above, and change as required .
Press the
SETUP
and the
ESCAPE
key together
Loadbar Settings
Your Racewell Super Drafter has the loadbars built in .
The following settings need to be applied to make them work correctly:
CAPACITY:
set to
1000.0 kg
SENSITIVITY:
set to
3.0000
mV/V to set these values:
To start automatic drafting
Select auto on the Racewell Drafter to start operation .
When the entries are set, press the escape key to return to the main screen .
