www.tepari.com Freephone 0800 837 274
16
Te Pari Racewell DR3 Auto Drafter Manual
1115-1
Racewell DR3
AUTO DRAFTER
Racewell DR3
ENTER
key
The blue soft keys select
the item shown above
them on the lower screen
SETUP
key
ESCAPE
key
BACK
key
POWER
key
ARROW
keys
Setting up an Tru-Test ID or XR300 for the DR3
- The primary buttons used during setup
Selecting and setting items - Read this first
To change an item you enter its screen by pressing the blue soft key below its title in the lower screen area
Changing an items setting is either a keyed in entry or a selection from a list.
1) Selecting and changing a setting from a list of options:
Use the Arrow keys to highlight the entry on screen
Press the
ENTER
key to display the list of available options for the entry
Arrow to highlight the required option
Press the
ENTER
key to select the option and close the list
2) Select and change the setting with keypad input:
You still arrow to the entry you wish to change but then you key in the data using the keypad
Once keyed in press the
ENTER
key to accept your entry and move on .
