Rev 3
3
of 7
NOTE
Call the number at the bottom of page 1 for suitability of other pc board materials.
B.
Tolerance
Maximum allowable bow of the board shall be 0.08 over the length of the connector. The coplanarity
of the pc board circuit pads must be 0.03.
C.
Circuit Pads
The circuit pads must be solderable in accordance with EIA-364-52.
D.
Layout
All holes and circuit pads must be precisely located on the pc board. The pc board layout must be
designed using the dimensions provided on the customer drawing for the specific connector.
Figure 2
Recommended PC Board Layout
Connector Mounts
Needle-Eye Holes
Circuit
Pads
Needle-Eye Holes
