TE Connectivity HVA280-2P, Assembly Instructions

Page: 1 / 4

Instruction Sheet
1 of 4
© 2021 TE Connectivity Ltd. family of companies.
All Rights Reserved.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
www.te.com .
408-35241
5 NOV 2021
Rev A
Figure 1: Crimping die and ferrule locator assembly for HVA280-2P ferrules
1
Shank
4 Rear locator
2
Crimper
5
Nest
3
Hold-down
6 Ferrule locator assembly
1. INTRODUCTION
The crimping die assembly (Figure 1) is designed to be installed into the modular tool holders listed in Table 1.
The crimping die assembly is designed to crimp HVA280-2P ferrules.
Table 1: Part numbers and documents
Crimping die
assembly
Wire range
Terminal part
number
Application
specification
Modular tool
holder
Instruction
sheet
2385674-1 2x4+2x5 mm²
1587723-3
1587724-3
2103171-1
114-32034
2305470-1
408-35048
2326378-1 408-35049
Crimping Die and Ferrule Locator
Assembly for HVA280-2P Ferrules