408-1261
8
of 9
Rev K
Figure 9
Figure 10
“W” = 6.35 +/-0.13 [.250 +/-.005]
GAGE ELEMENT DIAMETER
GAGE ELEMENT DIAMETER
GO
NO-GO
GO
NO-GO
4.293-4.300 [.1690-.1693]
4.442-4.445 [.1749-.1750]
1.626-1.633 [.0640-.0643]
2.131-2.134 [.0839-.0840]
Detail A
Inspection of Wire Barrel
Section of Crimping Chamber
Detail B
Inspection of Insulation Barrel
Section of Crimping Chamber
Crimping Dies
Bottomed But Not
Under Pressure
Plug Gage
GO Element Must Pass Completely
Through Crimping Chamber
GO Element Must Pass Completely Through Length of Insulation
Barrel Crimping Chamber But Stop on Wire Barrel Section
Plug Gage
Insulation Crimp
Adjustment Pin
In Position 1
NO-GO Element May Start Entry, But Must Not Pass Completely Through Crimping Chamber
Crimping Dies Bottomed
But Not Under Pressure
