408-1261
6
of 9
Rev K
Figure 8
Insert each insulation crimp adjustment pin into
position according to the following:
Make sure that both insulation crimp adjustment
pins are in the same position.
•
Position 3 for wire having a large insulation
diameter.
•
Position 2 for wire having a medium insulation
diameter.
•
Position 1 for wire having a small insulation
diameter.
5. MAINTENANCE AND INSPECTION
It is recommended that a maintenance and inspection
program be performed periodically to ensure
dependable and uniform terminations. Though
recommendations call for at least one inspection a
month, frequency of inspection depends on:
1. The care, amount of use, and handling of the tool.
2. The presence of abnormal amounts of dust and
dirt.
3. The degree of operator skill.
4. Your own established standards.
The tool is inspected before being shipped; however, it
is recommended that the tool be inspected
immediately upon arrival to ensure that the tool has
not been damaged during shipment.
CAUTION
!
