8-Port GIGABIT MANAGED PoE
SWITCH QUICK INSTALLATION GUIDE
LED INDICATORS
After installing the switch and connecting cables, the green power LED should turn on.
Please refer to the following table for LED indication.
LED
Color
Status Description
PWR
Green
On
DC power module activated
R.M
Green
On
Device operating in Ring master
mode
Ring
Green
On
Ring enabled
Blink
Ring structure is broken
Fault
Amber
On
Errors occur (i.e. power failure or port
malfunction)
10/100/1000Base-T(X) P.S.E. Ethernet ports
LNK/ACT
Green
On
Port is linked
Blink
Transmitting data
PoE
Green
On
Power supplied over Ethernet
Speed
Green
On
Port is running at 1Gbps
Amber
On
Port is running at 100 Mbps
-
Off
Port is running at 10Mbps
Revision 1_0, 20 August 2019
NETWORK CONNECTION
The device provides Ethernet ports in M12 connector type. According to the link type,
the switchuses CAT 3, 4, 5,5e UTP cables to connect to any other network devices
(PCs, servers, switches,routers, or hubs). Please refer to the following table for cable
specifications
Pin No.
Type
Max Length Connector
10BASE-T
Cat. 3, 4, 5 100
Ω
UTP 100m
M12 A-coding female
100BASE-T
Cat. 5 100
Ω
UTP
UTP 100m
M12 A-Coding female
1000BASE-T
Cat. 5/5e 100
Ω
UTP
UTP 100m
M12 A-Coding female
Partnumber
Input power
PoE power budget
2352900-1
72-110V
60W
PoE power budget
LOGIN
Default IP adress: 192.168.10.1
Default username: admin
Default password: admin
Refer to the user manual for further instructions
RESET
To restore the device configurations back to the factory defaults, press the Reset but-
ton for 5 seconds. Once the power indicator starts to flash, release the button. The
device will then reboot and return to factory defaults.
