8-Port GIGABIT MANAGED PoE
SWITCH QUICK INSTALLATION GUIDE
INSTALLATION
The device can be fixed to the wall. Follow the steps below to install the device on
the wall.
Step 1
: Hold the device upright against the wall
Step 2
: Insert four screws through the large opening of the keyhole-shaped aper-
tures at the top and bottom of the unit and fasten the screw to the wall with a screw
driver.
Step 3
: Slide the device downwards and tighten the four screws for added stability.
PANEL LAYOUTS
WIRING
For pin assignments please refer to the instructions below:
Grounding
Grounding and wire routing help limit the effects of noise due to electromagnetic in-
terference (EMI). Run the ground connection from the grounding pin on the power
connector to the grounding surface prior to connecting devices.
Power port pinouts
The 2352900 series uses the 7/8 inch 5-pin male connector on the front panel for the
power input.
Step 1
: Insert a power cable to the power connector on
the device.
Step 2
: Rotate the outer ring of the cable connector until
a snug fit is achieved. Make sure the connection is tight.
Console port pinout
Pin
No.
Description
Pin
No.
Description
1
BI_DC+
5
BI_DB+ / PoE Vout-
2
BI_DD+
6
BI_DA+ / PoE Vout+
3
BI_DD-
7
BI_DC-
4
BI_DA- /POE Vout+
8
BI_DB- / PoE Vout-
Relay
NC
NC
NC
1
7
2
8
M12 A-Code Ethernet ports
Relay output ports pinouts
The switch uses the M12 A-coded 5-pin female
connector on the front panel for relay output. Use
a cable with an M12 A-coded 5-pin male connector
to connect the relay. The relay contacts will detect
user-configured events and form an open circuit
when an event is triggered.
1
Reset Button
2
Power status LED
3
R.M. Status LED
4
Ring Status LED
5
Fault LED
6
Link/ACT LED for PoE
enabled Gigabit ports
7
PoE Indicator for PoE
enabled Gigabit ports
8
Speed LED for PoE
enabled Gigabit ports
9
PoE enabled Gigabit
Ethernet ports
10
Power connector
11
Relay output port
12
Console Port
1
2
5
3
4
8
7
6
9
9
10
12
11
3
4
5
6
