Introduction
Welcome to the Ultrasonic Recording Manual, your go-to source of information for recording ultrasonic rat
vocalizations with a Tucker-David Technologies (TDT) RX6 Multifunction Processor via the
Ultrasonic_Recording_Interface software.
This manual provides information about navigating the graphical user interface (GUI) and possible errors that
you may encounter. Future versions will include guidelines for modifying the source code, should the
program become insufficient for new applications. Should you encounter issues that are not addressed in
this manual, please contact Erica Nordin at [email protected].
Created with the Personal Edition of HelpNDoc:
Easily create PDF Help documents
Starting the RX6 and microphone
The RX6 and microphone each have a hardware power switch which must be started independently before
opening the program. If the RX6 is on, it will display information on the front display. If the microphone is on,
the "Power On" button will be lit.
If the RX6 is not already on, the user must run a procedure through the zBUSmon program to prevent
. A shortcut to zBUSmon is located on the desktop.
The RX6 should be visible at the bottom of the window. Press "Reboot System!", wait for the reboot, and
