December
2009 14 of 54
6.2.2
TV Setup
Setup the display mode for TV. See Figure 11.
6.2.2.1
TV Format
Set display format for watching program, such as 4:3LB, 4:3PS, 16:9LB, 16:9FIT.
(1)
Press <Up/Down> button to select
TV Format
option.
(2)
Press <Left/Right> button to set format.
6.2.2.2
TV Mode
Set PAL, NTSC or AUTO for display. AUTO will switch PAL or NTSC by program content. This setting
should be matched with user’s TV.
(1)
Press <Up/Down> button to select
TV Mode
option.
(2)
Press <Left/Right> button to set mode.
6.2.2.3
OSD Transparency
Set the On Screen Display transparency. 1 is the most diaphanous.
(1)
Press <Up/Down> button to select
OSD Transparency
option.
(2)
Press <Left/Right> button to set transparent value.
6.2.2.4
Banner Display Time
Set Banner displays time. Banner doesn’t disappear when setting “Always”. It displays at watching
program. See Figure 12.
(1)
Press <Up/Down> button to select
Banner Display Time
option.
(2)
Press <Left/Right> button to set the time.
Figure 11. TV Setup Page
Summary of Contents for DTR 3002CU PVR
