background image

IPmux-24 

TDM Pseudowire Access Gateway 

Ordering 

STANDARD CONFIGURATIONS 

IPMUX-24/1E1/N/N/N 

IPMUX-24/1E1CX/N/N/N 

IPMUX-24/1T1/N/N/UTP 

IPMUX-24/4T1/N/N/UTP 

IPMUX-24/FE/1E1/UTP/UTP/UTP 

IPMUX-24/FE/1E1CX/UTP/UTP/UTP 

IPMUX-24/FE/1T1/UTP/UTP/UTP 

IPMUX-24/FE/2E1/UTP/UTP/UTP 

IPMUX-24/FE/2E1CX/UTP/UTP/UTP 

IPMUX-24/FE/2T1/UTP/UTP/UTP 

IPMUX-24/FE/4E1/UTP/UTP/UTP 

IPMUX-24/FE/4E1CX/UTP/UTP/UTP 

IPMUX-24/FE/4T1/UTP/UTP/UTP 

IPMUX-24/FE/A/4T1/N/N/UTP 

SPECIAL CONFIGURATIONS 

IPMUX-24/+/!/?/~/CC/$/+1/+2/+3 

Legend 

+  Ethernet interface (Default=FE and GbE 

capabilities) 

  FE 

Fast Ethernet interface only 

Note:  FE option is mandatory when UTP/UTP/UTP 
port combination is required. 

!  Power supply (Default=AC/DC): 
  WRDC  Wide range DC power supply for 

environmentally hardened 
device 

?  Enclosure (Default=regular enclosure): 
  H Environmentally 

hardened 

enclosure 

~  Clock recovery (Default=standard clock 

recovery): 

  A Advanced 

clock 

recovery 

mechanism (per TDM port) 

CC Package (Default=no carrier-class 

package) 

  C 

Carrier-class package (external 
clock and alarm relay) 

 

 

$  TDM interface: 
  1E1 

Single balanced E1 interface 

  1E1CX  Single unbalanced E1 interface 

  1T1 

Single balanced T1 interface 

  2E1 

2 balanced E1 interfaces 

  2E1CX  2 unbalanced E1 interfaces 

  2T1 

2 balanced T1 interfaces 

  4E1 

4 balanced E1 interfaces 

  4E1CX  4 unbalanced E1 interfaces 

  4T1 

4 balanced T1 interfaces 

Note:  Unbalanced E1 interfaces are provided via 
RJ-45 to BNC adapter cables supplied with the 
product. 

+1   Network interface: 

 

N SFP-ready 

slot 

 

Fast Ethernet/STM-1, 1310 nm, 
multimode, LED, 2 km (1.2 mi) 

 

Fast Ethernet/STM-1, 1310 nm, 
single mode, laser, 15 km 
(9.3 mi) 

 

2H  Fast Ethernet/STM-1, industrially 

hardened, 1310 nm, single mode, 
laser, 15 km (9.3 mi) 

 

Fast Ethernet/STM-1, 1310 nm, 
single mode, laser, 40 km 
(24.8 mi) 

 

3H  Fast Ethernet/STM-1, industrially 

hardened, 1310 nm, single mode, 
laser, 40 km (24.8 mi) 

 

Fast Ethernet/STM-1, 1550 nm, 
single mode, laser, 80 km 
(49.7 mi) 

 

10A  Fast Ethernet/STM-1, Tx – 

1310 nm, Rx – 1550 nm, single 
mode (single fiber), laser (WDM) 
, 20 km (12.4 mi)  

 

10B  Fast Ethernet/STM-1, Tx – 

1550 nm, Rx – 1310 nm, single 
mode (single fiber), laser (WDM),  
20 km (12.4 mi) 

 

18A  Fast Ethernet/STM-1, Tx – 

1310 nm, Rx – 1550 nm, 9/25 
single mode (single fiber), laser 
(WDM), 40 km (24.8 mi) 

 

18B  Fast Ethernet/STM-1, Tx – 

1550 nm, Rx – 1310 nm, 9/25 
single mode (single fiber), laser 
(WDM), 40 km (24.8 mi) 

 

19A  Fast Ethernet/STM-1, Tx – 

1490 nm, Rx – 1570 nm, 9/25 
single mode (single fiber), laser 
(WDM), 80 km (49.7 mi) 

 

19B  Fast Ethernet/STM-1, Tx – 

1570 nm, Rx – 1490 nm, 9/25 
single mode (single fiber), laser 
(WDM), 80 km (49.7 mi) 

 

Summary of Contents for IPmux-24













Reviews: