TDK Velocd Quick Manual Download Page 2

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee interference will not occur in a particular installation. If this
equipment causes harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

>

Reorient or relocate the receiving antenna.

>

Increase the separation between the equipment and receiver.

>

Connect the equipment to an outlet on a circuit different from that to which 
the receiver is connected.

>

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications should be approved by the party responsible for compliance
with FCC Rules; otherwise, the user loses authority to operate the equipment. 

The laser beam emitted from the optical pickup is invisible. 
Accordingly:

>

Do not open the optical pickup housing.

>

Obtain service only from TDK-authorized personnel.

LASER INFORMATION

This product has been designed and manufactured according to IEC 825-1 on the Safety of
Laser products. This product comes under “Class 1 Laser Products.” A Laser Caution
Marking is attached on the top of the internal drive model: “Caution: Invisible  laser radia-
tion when open. Avoid direct exposure to beam.”

CAUTION:

Improper use of controls

adjustments, or performing procedures
other than those specified herein may
result in hazardous radiation exposure.

CAUTION:

Your CD-R/W drive 

contains sensitive, high-precision optics.
Dropping and/or shaking the CD-R/W 
drive could damage these sensitive 
components. Please be careful when 
handling your CD-R/W drive.

CAUTION:

Any changes not

approved by the manufacturer could 
void the user’s warranty and authority 
to operate the equipment.

Summary of Contents for Velocd













Reviews: