14
Full Brick
A series of products with an input range of 200 – 400V DC
that provide conversion to fully, tightly regulated low
voltage output for powering a variety of loads. Typical
applications include ‘DC power distribution’ or ‘DC energy
distribution’ systems for the emerging higher voltage DC
bus structures found in newer data centre power architec-
tures and from TDK-L’s ‘PF’ AC-DC PFC front end module.
• 3kV AC isolation input to output
• Very wide output voltage adjustment / trim range
• Remote sense
• Monotonic start – up
• Starts into pre – biased load
• Constant switching frequency
• Active current share
• Auxiliary supply rail
• Isolated on / off control
• Inverter ‘good’ signal
Series
PAF450 / 600 F280
Warranty
2 years
Format
closed frame
Industry standard full brick, thru hole
Baseplate yes
Output voltage 12, 24, 28 and 48 V
Input voltage range 200 – 400V
Output trim feature yes
Remote sense feature yes
Efficiency upto 91 %
Output current / power
upto 50A / 600W
380 V input voltage DC/DC
converters – isolated,
regulated output
Summary of Contents for F280 Series
Page 1: ...APPLICATION GUIDE...
