Attention – Damage to device!
Never touch the CeraPlas Element. This component can be damaged by
improper handling.
Active filter! The active filter used in the filtering extension is maintenance-
free, but if the ozone reduction does not work, please contact the
manufacturer.
9.2 Cleaning
The apparatus should be cleaned regularly depending on the degree of contamination.
Cleaning work may only be carried out by persons who have the
appropriate knowledge and have read and understood these instructions!
During this work, it is essential to disconnect the application from the
power supply.
9.2.1 Cleaning the surface of the application
The surface should be cleaned with appropriate cleaning utensils.
The following points must be observed when cleaning:
Clean the demonstrator principally only on the outside
If the inside needs to be cleaned, be extra careful
Make sure that the device is disconnected from the power supply
Clean the device only with a dry cloth
Do not use solvents to clean the device
Do not clean the CeraPlas piezo element
Do not clean electrical connectors
Attention – Damage to device!
Never touch the CeraPlas piezo element. This component can be
damaged by improper handling.
Damage to surfaces due to cleaning agents.
The use of acidic, alkaline or abrasive (grinding) cleaning agents may cause
irreparable damage to the surface.
Use only appropriate cleaning agents
Cleaning with polishing agents must not scratch the surface
Never use objects for cleaning, such as knives, scrapers or steel wool, which could
cause scratches on the surface.
CeraPlas Explorer Kit
© TDK Electronics AG
32
