CeraPlas Explorer Kit
© TDK Electronics AG
11
5 Basic safety instructions
5.1 Protective measures and safety instructions
No special protective measures are required for the operation of this apparatus,
however, the safety instructions and residual risks as well as the intended use and
reasonably foreseeable misuse must be taken into account.
The user must read and understand these instructions in full (see, among other things,
section 5.6 Residual risks and 5.7 Obligation of the user) and comply with the
requirements addressed to the user and familiarize himself with the residual risks
posed by the apparatus.
5.2 Intended use
This development kit is not a finished apparatus or appliance regarding the european
marketing regulations and is therefore not intended for the end-user but for users
(developers) during a development process (see section 4 Notes to the user
(developer)).
This device (apparatus) is not intended for the end-user!
The TDK Explore Kit is a demonstrator unit for exploring dry disinfection processes
using the CeraPlas technology. Whereby, the kit includes a filter extension unit and an
Android app which allows to define its own decontamination process. Only use the
device for the intended purposes. Misuse may restrict apparatus liability.
Intended use also includes:
observance of all instructions in this operating manual
observance of the installation instructions
the correct behavior in the event of malfunctions
the exclusive repair by the manufacturer in case of possible malfunctions
use only in proper condition
5.3 Reasonably foreseeable misapplication
Any use other than that specified under Intended use (see section 5.2 Intended use)
or which goes beyond this is considered improper use!
For damage resulting from improper use the user bears sole responsibility,
the manufacturer assumes no liability whatsoever.
Risks may occur if the device is not used as intended!
