INSTRUCTION MANUAL
EVS300W/600W
Series
TDKLambda
<Page>
54. Mounting Method
EVS300W
Insert the spacer (Max
φ
8) of height more than 8mm to lift the product. And use all mounting holes A for the product
installation. The vibration spec is specified under this mounting condition. Please use mounting hole B as needed,
vibratility resistant improves.
(1)Mounting Holes size
5 holes
φ
3.5mm
Allowable area by metal pieces is 9mm from each PCB corners. Refer to figure below.
If the space is not enough, the specification of isolation and withstand will not be satisfied. Take the space in the product
surroundings and the upper area of components to keep enough for convection cooling.
(2)Condition to meet Isolation & Withstand Voltage standard
Keep 4mm space from the surfaces and sides of PCB.
Especially, 8mm space is necessary from the solder surface.
17/22
A
A
A
A
B
Height more than 8mm spacer
9m
m
9m
m
9m
m
9m
m
9m
m
M
or
e
th
an
4m
m
M
or
e
th
an
4m
m
M
or
e
th
an
8m
m
PCB
Component side
M
or
e
th
an
4m
m
More than
4mm
More than
4mm
