10
05/2013
TCS TürControlSysteme AG, TCS Hotline Germany:
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
Mail: [email protected]
FIL1101 UK 1A
mi
many parameters have been entered, the whole instruction sequence will also be re-
jected, a negative acknowledgement tone sounds.
When operating the IR remote control always point it with the head towards the device.
The range of the IR remote control is max. 1 m direct line.
Every keystroke at the IR remote control is acknowledged by the FIL1101 with a brief
button acknowledgement tone (
).
ATTENTION! Change master code
Anybody who has the enclosed IR remote control can set the programming at every device
with the factory setting master code. For safety reasons, the preset master code should be
changed when commissioning!
Initiate programming
Authorisation via IR
remote control
Keystroke is acknowledged by the device with
a brief button acknowledgement tone.
Note:
If the ring tone output is switched off, the red
LED goes OFF with the first keystroke (entry:
*). This function stays active. The red LED is
ON again, as soon as the programming mode
has been left.
…
LED, red is OFF.
* master code #
(WE* = <6 digit serial number FIL1101>)
Correct entry: ready to
programme
A positive acknowledgement tone sounds,
LED, red is ON for 3 s.
then, LED, red blinks.
Wrong entry, unknown
master code
A negative acknowledgement tone sounds
when pressing the #-key.
The LED, red blinks fast for 3 s,
then the LED goes off.
No entry
A false code can only be entered 3 times.
Then, the code entry is locked for 2 minutes.
No code can be entered:
the red LED flashes and goes off (7:1, 1 Hz)
for 2 minutes, then goes off again.
Start from the beginning.
If for 2 minutes, no command has been en-
tered, the device automatically terminates the
programming mode, the red LED goes off.
