04/2013
9
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
Mail: [email protected]
PI_FBO1200-uk 1A
Commissioning steps
Install the devices of the TCS system completely and connect the FBO1200 to the tele-
phone system (see wiring example).
Check the a-, b- and P-wire against each other on short-circuits.
Switch on the mains voltage.
The yellow LED (status PBX / PSTN) flashes 4 times ON, once with a long break.
(blink mode: also see
First check the connection of the FBO1200 to the telephone system with a call to the
telephone number which is assigned to the FBO1200 from the telephone system.
Check the connection of the FBO1200 to the front-door station by pressing the
but-
ton 1
as well as the function of the
buttons 7
and
8
. The conenction can be ended
by pressig the
button 9
or by hanging up the handset.
Thus, the system is basically
ready to operate
and can be configured.
If the commissioning check is
not successful
, errors may have occured.
The TK-Interface
accepts, sends
aQ
Call at the TK-
Interface
*
