15
Notices
•
For programming you need the 6-digit serial number of the transponder reader.
•
A transponder contains a unique number that can be assigned to one or more transponder readers.
This number is stored in the transponder reader.
•
A transponder (or master transponder) can be allocated to several devices.
•
If the entry is correct, a positive acknowledgement tone (
) sounds.
If the entry of a command sequence … is interrupted for 8 s, the entire command se-
quence is rejected and a negative acknowledgement tone (
) sounds.
•
If the command sequence does not correspond to the specified syntax or if too many parameters
have been entered, the entire command sequence is also rejected and a negative acknowledgement
tone sounds.
•
When operating the infrared remote control, always aim the head of the remote control directly at the
front-door station. The range of the infrared remote control is max. 1 m in direct distance.
•
Each press of a button on the infrared remote control is confirmed by the transponder reader with a
short acknowledgement tone (
).
For safety reasons, the master code set ex works should be changed.
Programming with infrared remote control
Keep the device closed during programming to prevent programming errors due to an open
sabotage contact.
In order to program the device with the infrared remote control, you need the infrared remote control in-
cluded in the scope of delivery.
Pressing a key at the remote control is confirmed with a short key acknowledgement tone
.
Summary of Contents for AZC41000-0010
Page 1: ...Product information transponder reader AZC41000 0010 ...
Page 2: ...2 ...
