TCS AMI K3 Series, Product Information

Page: 12 / 20

12 01/2013
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de Subject to technical changes.
Fax: +49 (0) 41 94 / 9 88 129

www.tcsag.de PI_AMI1xx00_uk
profile

Loosen the two knurled screws which are lo-
cated at the inside of the post corpus, directly
above the hollow wall boxes.

Push out the lower back panel .
Dismount / install the front panel

Screw off the knurled nuts and knurled screws
with spacer bolts (location of the modules).

Remove the front panel of the post corpus to
install the modules.
!
In the middle part of the front panel of a post
with up to 3 modules, there are 2 knurled
screws with spacer bolts, and in case of 4, 5
or 6 modules 4 knurled screws with spacer
bolts which needs to be loosened / tight-
ened.

For the installation of modules into the front
panel see Installation of the modules into the
front panel (standard)
, page 8.

Put on the front panel with the assembled
modules onto the post corpus and fix it again
from the inside using the knurled nuts and
knurled screws with spacer bolts.
knurled screw
lower back panel
hollow wall box
knurled nut
front panel
knurled screw with
spacer bolt